|
|
pH Meter
|
With 0.01 pH units resolution, this hand-held probe can be hired for as little as £10 + VAT per day.
The meter is supplied pre-calibrated and with a pH 7.0 check solution and full written instructions for use.
THIS INSTRUMENT IS CURRENTLY AVAILABLE TO HIRE
To reserve, e-mail your details and required hire period to: hire@caledonianlabs.co.uk
|
|
|
pH Meter
|
Jenway pH model 3051. Readability to 0.01 pH units resolution, with full temperature compensation, buffer and slope calibration. This meter can be hired for as little as
£15 + VAT per day.
The meter is supplied pre-calibrated and with pH 7.0 and pH 4.0 calibration buffers and full written instructions for use and sturdy carry-case.
THIS INSTRUMENT IS CURRENTLY AVAILABLE TO HIRE
To reserve, e-mail your details and required hire period to: hire@caledonianlabs.co.uk
|
|
|
Dissolved Oxygen Meter
|
Provided with DO Blank calibration solution and written instructions this instrument can provide accurate Dissolved Oxygen measurements to 0.01 mg/L or in % saturation.
This instrument comes with a 3m probe cable for bore-hole monitoring applications. This instrument is available to hire for £15 + VAT per day.
THIS INSTRUMENT IS CURRENTLY AVAILABLE TO HIRE
To reserve, e-mail your details and required hire period to: hire@caledonianlabs.co.uk
|
|
|
Dissolved Oxygen Meter
|
Provided with DO Blank calibration solution and written instructions this instrument can provide accurate Dissolved Oxygen measurements to 0.01 mg/L or in % saturation.
This instrument is available to hire for £10 + VAT per day.
THIS INSTRUMENT IS CURRENTLY ON HIRE
To reserve, e-mail your details and required hire period to: hire@caledonianlabs.co.uk
|
|
|
Lead in Drinking Water Analyser
|
Rapid on site determination of Lead in drinking water to 0.002mg/L Limit of Detection (Current EU maximum permissable
concentration is 0.025 mg/L, soon to drop to 0.010 mg/L)
The meter also simultaneously provides copper content to 0.07 mg/L which is useful for checking for water pipe corrosion.
PLEASE NOTE:
This instrument uses disposable pre-calibrated electrodes, which must be ordered in advance of hire.
This instrument is available to hire for £15.00 + VAT per day + £10.00 + VAT per calibrated lead / copper electrode.
THIS INSTRUMENT IS CURRENTLY ON HIRE
To reserve, e-mail your details and required hire period to: hire@caledonianlabs.co.uk
|
|
|
Total Dissolved Solids Meter
|
Capable of measuring dissolved solids to nearest 0.1mg/L, this instrument comes complete with rugged carry-case, instructions and calibration
standards. This instrument is available from £15 + VAT per day.
THIS INSTRUMENT IS CURRENTLY AVAILABLE TO HIRE
To reserve, e-mail your details and required hire period to: hire@caledonianlabs.co.uk
|
|
|
Electrical Conductivity Meter
|
Provided with calibration standard and written instructions for use, this instrument will provide readings over an impressive range - from
0.01 us/cm to 199.99 ms/cm
This instrument is available to hire from £15.00 + VAT per day.
THIS INSTRUMENT IS CURRENTLY AVAILABLE TO HIRE
To reserve, e-mail your details and required hire period to: hire@caledonianlabs.co.uk
|
|
|
|
|
|
|
|
|
|
|
|
|
